Cleaning up Europe's largest wooden structure in preparation for its 50th anniversary required an efficient method that could effectively clean a massive structure in a short period of time without causing any damage.

To clean off years of accumulated grime, RobotWorx turns to dry ice blasting to refurbish industrial robots.

In a highly regulated industry, foodservice facilities must utilize a cleaning process that adheres to strict guidelines.

The General Mills Foodservice Plant in Chanhassen, Minnesota is a leading producer of baked and unbaked food products. With the high production levels of the plant, grease, oil, dust and flour accumulate quickly on the conveyors, motors and panels of the cooling tunnels. Cleaning these tunnels manually with steam and water was a less than ideal method for the plant's operations.

The refrigerator and freezer manufacturing process demands that products are 100% free of dirt and debris.

As the global leader in home and professional use appliances, Electrolux Group is all too familiar with this dilemma. The Electrolux Refrigerator Factory, located in Nyiregyhaza, Hungary, produces combi-bottom and one door refrigerators and freezers. 

With its dome nearly 800 feet above sea level, the Split Rock Lighthouse is constantly whipped by heavy winds and rain.

An Ontario construction company specializing in highway asphalt paving chooses dry ice blasting over manual methods to quickly and efficiently clean transport vehicles.

Vernay needed a rubber mold cleaning solution that would enable them to clean in place and reduce their overall downtime.

How do you clean a jet engine?

Gas turbine engines are used to power aircraft, watercraft and power generators.

Typically they include an engine core, which has a compressor, a combustor and a turbine. The compressor pressurizes air to the combustor. In the combustor, fuel is mixed with the high pressure air and is ignited. Hot gas is created as a product of the reaction and is directed into the turbine where energy is extracted to drive the compressor and the fan.

The Progress Casting Group was looking for a more effective cleaning method for their low pressure casting molds.

Corrosion is a major problem on offshore oil platforms.

On an oil platform in the North Sea, the fabric maintenance team - who is responsible for maintaining the integrity of the platform - was working to remove corrosion and failed coating from gas lines within the gas compression module. The team also planned to recoat them.